Product Specifications
Steintec tuffjoint is an easy-to-use, cement-based dry jointing mortar suitable for paths, patios and driveways. Designed for use with porcelain, sandstone, concrete and granite paving, it provides a straightforward jointing solution without the need for mixing.
Simply sweep the dry mortar into the paving joints, remove any excess and activate it using a fine mist of water. Any unused dry product can be returned to the tub and saved for another job, helping to minimise waste.
Available in Flint, Anthracite, Hessian and Cream, tuffjoint can fill irregular cavities and paving joints as narrow as 4mm.
Key features:
- Supplied in a 12.5kg tub
- Covers up to 31m²
- No mixing required
- Suitable for porcelain, sandstone, concrete and granite
- Ideal for paths, patios and driveways
- Suitable for joints from 4mm wide
- Contains no resins or polymers
- Unused dry mortar can be returned to the tub
- Available in four colours
- Reusable and recyclable tub made from recycled materials
Application:
Sweep tuffjoint into the paving joints using a squeegee, broom or brush. Once the joints are filled, carefully remove the excess product before applying water with a fine mist spray. Continue misting until water begins to pool on the surface, then clean the paving using suitable equipment.
Do not install during rain. If rain is forecast within six hours of application, the completed area should be covered to prevent the mortar from being disturbed.
Please note: Coverage will vary depending on the dimensions of the paving, joint width and joint depth.